Velleman PROMIX50U - Manual (Page 5)

PROMIX50U
19.11.2009 ©Velleman nv 5
PSU
26 12 VAC power adaptor. Only use the included PSU. When connecting the power cord, please
make sure the power of the unit is off. Connect the cord to the rear of the mixer and then
connect it to the mains outlet.
SIDE PANEL
27 Headphones input connection.
5. Cleaning and Maintenance
• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections,
• Moving mechanic parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
6. Technical Specifications
power supply 230 VAC ~ 50 Hz
power consumption 5 W
audio inputs
mic 20 mV, unbalanced
phono 15 mV/1k Hz, unbalanced
line 0.8 V, unbalanced
S/N ratio > 80 dB (line in)
crosstalk > 50 dB (line in)
THD < 0.025 %
frequency response 20 Hz ~ 20k Hz
dimensions 235 x 60 x 135 mm
weight 0.95 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.hqpower.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.