Velleman SW2 User Manual

Sw2 - multifunctional water-resistant stopwatch

Advertising
background image

SW2

VELLEMAN

1

SW2 - MULTIFUNCTIONAL WATER-RESISTANT STOPWATCH

1. INTRODUCTION & FEATURES

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company

for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the SW2! This multifunctional stopwatch is an ideal training partner for both professional and
recreational sporting men and women. The device is equipped with a number of very useful functions:

Time/Calendar Display : hours, minutes, seconds, month, date and day of the week are displayed
Stopwatch Accuracy

: 1/100 of a second during the first half hour, 1 sec. after 24hrs.

Time Display Mode

: 12/24hr-mode

Alarm Mode

: the alarm can be set arbitrarily

Split Time

: recording of split times of one or two athletes

2. NORMAL OPERATION MODE

TIME

Hours, minutes and seconds are displayed.

ALARM

Hold button C to display the current alarm time.

ALARM ON/OFF

Hold B and C (see fig.) simultaneously to activate/deactivate the alarm.

CALENDAR

Hold B to display the month, the date and the day of the week.

12/24HR-MODE

Select either the 12hr- or the 24hr-mode when setting the time. Press A (see figure) three times to make the digits for the
seconds flash. Press B to reset the seconds. Press C to confirm the seconds and make the digits for the minutes flash.
Use B to set the minutes, press C to confirm the minutes and make the digits for the hours flash. Note that the digits

will progress faster if B is held. Press B again to advance the hours until the "A"-, the "P"- or the "H"-symbol appears
on the display: "A" and "P" stand for 12hr-mode, "H" for 24hr-mode. Press A to return to the normal time display.

SW2

Advertising