Velleman VDPLOW3601 - Manual (Page 6)

VDPLOW3601_v2 HQPOWER 6
different addresses, each device will “listen” to a separate channel number. Changing the settings of one channel will
only affect the device in question.
In the case of the 7-channel VDPLOW3601, you will have to set the start address of the first VDPLOW3601 to 1, the
second VDPLOW3601 to 8 (1 + 7), the third to 15 (8 + 7) and so on.
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
7. Technical Specifications
Power Supply
max. 230 VAC / 50 Hz
Power Consumption max. 48 W
IP Rate IP65
LEDs 36 x 1 W
Beam Angle 30°
DMX512 XLR 3-pin
Dimensions 310 x 135 x 85 mm
Total Weight 3.1 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product, please
visit our website www.hqpower.com. The information in this manual is subject to change without prior
notice.