Velleman PCSU200 User Manual
Page 11
Advertising
11
T
HE
B
ODE
PLOTTER
MODULE
:
What ? :
Due to the unique scope and generator combination, an automated Bode plot function is possible.
This results in a powerful tool for amplifi er or fi lter measurements.
How ? :
Enable the Circuit Analyser window (
•
1
)
Connect the scope CH1 input to the output of the circuit or unit under test.
•
Connect the generator output to the input of the circuit or unit.
•
Adjust the generator output (
•
2
) to a suitable level.
Adjust the setting of the Bode plot module like Volt range (
•
3
) Volt scale,
frequency start and stop range (
4
)...
Press ‘Start’ (
•
5
) and observe the screen and measurement window (
6
)
If the signal is out of the screen range, adjust the Voltage range or generator output level.
•
1
2
6
3
5
4
Advertising