Velleman VDPDP134 - Manual (Page 4)

VDPDP134 VELLEMAN 4
• Note that all modifications of the device are forbidden for safety reasons.
• Do not remove the serial number sticker from the device as doing so will void the warranty. Only use the device
for its intended purpose. All other uses may cause short circuits, burns, electroshocks, lamp explosions, crashes,
etc. Using the device in an unauthorised way will void the warranty.
4. Description
a) Front Panel
1. Automatic circuit breakers 20A
2. Preheating adjustment (max. 50%)
3. Power ON indicator
4. DMX channel output indicators
5. DMX "ON" indicator
6. Power switch
7. DMX channel output faders : adjusts the output level (dimming level) of each channel
8. DMX start address, selected via DIP switch settings
9. Load indicators
b) Back Panel
10. Analogue input (0-10Vdc)
11. Analogue output
12. DMX input (3-pin male XLR)
13. DMX output (3-pin female XLR)
14. Schuko sockets
15. Power input
c) Connections
Remove the cover of the load connection box and connect the mains and the load to the device according to the
figure above.