Velleman VDLPROM3 - Manual (Page 4)

VDLPROM3 Rev. 01
05.05.2010 ©Velleman nv 4
• Make sure the rotation of the mirror ball is never hampered and that no side forces can impact on the
installation.
• The installation has to be approved by an expert before the device is taken into service.
5. Use
Remove the cover of the battery operated mirror ball motor, insert a D-size alkaline battery and close the
cover.
Attach the ball + chain to the motor and set the power switch to ON. The mirror ball will start turning at
1.5 RPM.
After connecting the pin spot to the mains, the lamp will be on. By aiming the spot towards the mirror
ball, you will obtain a beautiful, colourful effect.
6. Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location should not be deformed,
modified or tampered with e.g. do not drill extra holes in mounting supports, do not change the
location of the connections, …
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the lamp (see “4. Installation”).
8. Contact your dealer for spare parts if necessary.
9. Check regularly if the key ring or chain shackles have been deformed. If so, demount the mirror ball
immediately.
7. Technical Specifications
PAR-36 Pin Spot
Power Supply 230VAC/50-60Hz
Power Consumption max. 30W
Dimensions ∅ 120 x 160mm
Weight 1,1kg
Lamp PAR-36 lamp [order code LAMP36, LAMP36GE (General
Electric)]
Max. Ambient Temperature 45°C
Max. Housing Temperature 100°C
Mirror Ball
Diameter 20 cm (8")
Total Weight 0,9kg
Mirror Ball Motor
Power Supply battery, D-type, 1.5V
Rotation Speed 1.5 RPM
Maximum diameter of mirror ball 20cm (8")
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.