Velleman VTBAL22 - Manual (Page 4)

VTBAL22
10/01/2011 4 ©Velleman nv
• Place the indicated standard calibration weight onto the weighing
platform.
• Wait a couple of seconds until “PASS” is displayed. The scales are
now calibrated and ready for use.
c. Other Functions
• Press the CAL / MODE button to choose the weighing unit: g
(grams), oz (ounces), ozt (troy ounces), dwt (pennyweight), ct
(carats), grain and tl (tael).
• “LO‐ ‐”: low battery indication. Replace the batteries with of the
same type and specifications.
• “O‐ ‐Ld”: weight overload.
6. Cleaning
• Do not use abrasive solutions or solvents e.g. benzene. Only use
clean water.
• Do not submerge the scale in water or any other liquid.
7. Technical Specification
capacity 500g
resolution 0.1g
tare range 0‐500g
operating temperature 15°C ~ 35°C
power supply 2 x 1.5V AAA batteries LR03C (incl.)
dimensions 100 x 80 x 19 mm
Use this device with original accessories only. Velleman nv cannot be
held responsible in the event of damage or injury resulted from
(incorrect) use of this device. For more info concerning this product
and the latest version of this user manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by
Velleman nv. All worldwide rights reserved. No part of this manual may be
copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.