Gebruikershandleiding, Operation, Technical specifications – Velleman PS1306C User Manual

Page 3: Inleiding, Veiligheidsinstructies

Advertising
background image

PS13xx

23.07.2009

©Velleman nv

3

4. Operation

1. Insert the AC power plug in a 230VAC/50Hz-outlet.

2. Connect the power cord of a device with the appropriate input voltage to the output binding posts on

the front panel. The red positive (+) terminal and black negative (-) terminal are indicated on the front

panel. Mind the polarity: reversal of polarity may damage the device.

3. Put the ON/OFF switch on the front panel in the "ON"-position. The light in the switch will come on.

4. The 230V-input is protected by the fuse, which is located at the back of the device. Replace a blown

fuse with an identical one.

5. This device is protected against brief short circuits and equipped with an automatic reset function.

5. Technical specifications

PS1303

PS1306

PS1306C

PS1310

PS1320

PS1330

output voltage

13.8V fixed

output current

3A

5A peak

(1)

6A

8A peak

(1)

6A

7A peak

(1)

10A

12A peak

(1)

20A

22A peak

(1)

30A

32A peak

(1)

ripple voltage

100mV

120mV

150mV

dimensions (mm)

110x125x70

175x125x170

175x160x90 215x130x280 290x200x110

weight

1.7kg 2.7kg 4.0kg

6.7kg

9.3kg

(1)

For max. 1 minute.

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulted from (incorrect) use of this device. For more info

concerning this product, please visit our website www.velleman.eu.

The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE

This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.

GEBRUIKERSHANDLEIDING

1. Inleiding

Aan alle ingezetenen van de Europese Unie

Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt

weggeworpen, dit toestel schade kan toebrengen aan het milieu. Gooi dit toestel (en eventuele

batterijen) niet bij het gewone huishoudelijke afval; het moet bij een gespecialiseerd bedrijf

terechtkomen voor recyclage. U moet dit toestel naar uw verdeler of naar een lokaal

recyclagepunt brengen. Respecteer de plaatselijke milieuwetgeving.

Hebt u vragen, contacteer dan de plaatselijke autoriteiten betreffende de verwijdering.

Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd het

toestel beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.

2. Veiligheidsinstructies

Houd buiten het bereik van kinderen en onbevoegden.

Elektrocutiegevaar bij het openen van het toestel. Raak geen kabels aan die onder stroom staan

om dodelijke elektroshocks te vermijden. Open de behuizing niet zelf en laat reparaties over aan

geschoold personeel.

Opmerking: Raadpleeg het bedradingschema op www.hqpower.com.

Trek de stekker uit het stopcontact (trek niet aan de kabel!) voordat u het toestel reinigt en als u

het niet gebruikt.

Gebruik de PS1303 niet met toestellen met een ingangsstroom > 3A.

Gebruik de PS1306/PS1306C niet met toestellen met een ingangsstroom > 6 A.

Gebruik de PS1310 niet met toestellen met een ingangsstroom > 10A

Gebruik de PS1320 niet met toestellen met een ingangsstroom > 20A

Gebruik de PS1330 niet met toestellen met een ingangsstroom > 30A.

Advertising