Velleman SOL21 - Manual (Page 5)

SOL21
V. 01 – 06/05/2013 5 ©Velleman nv
[2] before or during charging as this will start discharging the
internal battery!
Adaptor or USB port: Connect the mini USB input [3] to an
adaptor with output range 4.5-6.5 Vdc (not incl.) or to a powered
USB port using the included cable (charging time ± 2.5 h).
Solar charging: Place the solar charger with the solar panel
facing the sun into bright sunlight. Charging time ± 35 h.
During charging the capacity indicators [8] light up. The number of
LEDs indicate the charging level (4 red LEDs means the SOL21 is
fully charged).
6. Operation
1. Connect the included cable to the USB port [1].
2. Connect the desired plug to the end of the cable and connect
your appliance.
3. Press the output select button [2] to start charging the
connected device.
press output LED
1 x 5 Vdc / 1 A [5]
2 x 5 Vdc / 2 A [6]
3 x 9 Vdc / 1 A [7]
Note: The blue solar LED [4] lights up as soon as the solar panel
receives enough sunlight to charge the internal battery.
A single flashing capacity indicator [8] indicates the battery of the
SOL21 is almost depleted. Disconnect the appliance and recharge the
SOL21 (refer to §5).
7. Battery
Warning: This device contains an internal rechargeable
battery. When the device is end-of-life, it must be disposed
of in accordance with local regulations. Do not puncture
batteries or throw them in fire as they may explode. Keep
batteries away from children.
8. Technical Specifications
solar panel
monocrystalline silicon 5.5 V – 0.66 W
battery high-capacity built-in polymer, 3600 mAh
output voltage 5.0 Vdc/1 A – 5.0 Vdc/2 A – 9.0 Vdc/1 A
output current max. 2 A