Velleman VDPLP64SL User Manual
Page 5
VDPLP64SL
10.01.2011
©Velleman nv
5
number of fixtures on a serial data link is 32 fixtures.
•
A DMX terminator is recommended for installations where the DMX cable has to run a long distance
or is in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the
digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120Ω
resistor between pins 2 and 3, which is then plugged into the XLR output socket of the last device
in the chain.
c) general
•
Make sure there is no flammable material within a 50cm radius of the device and there is sufficient
cooling.
•
Have a qualified electrician carry out the electrical connection.
•
Connect the device to the mains with the power plug. All fixtures must be powered directly off a
grounded switched circuit and cannot be run off a rheostat or dimmer circuit, even if the rheostat
or dimmer channel is used solely for 0% to 100% switch.
•
The installation has to be approved by an expert before the device is taken into service.
7. Operation
Refer to the illustrations on page 2 of this manual.
Control Panel Navigation
•
Access the control panel functions using the four panel buttons located directly underneath the LCD
display.
button function
<MENU>
used to access the menu or to return to a previous menu option
<DOWN>
scrolls through the menu options in descending order
<UP>
scrolls through the menu options in ascending order
<ENTER>
used to select and store the current menu or option within the menu
•
The control panel LCD display shows the menu items you select from the menu map. When a menu
function is selected, the display will show immediately the first available option for the selected
menu function. To select a menu item, press <ENTER>.
•
Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press
<ENTER> to access the menu function currently displayed or to enable a menu option. To return to
the previous option or menu without changing the value, press the <MENU> button.
Menu Functions
menu sub-menu
function
description
p--
p1
7-colour switching
select between 2 switching and 2 fading built-in
programs
p2
7-colour fading
p3
7-colour switching
p4
7-colour fading
p5
7-colour sound control
select between 2 sound-active programs
use sound sensitivity adjustment knob [5]
p6
3-colour sound control
3-ch d001-d512
-
select 3-channel DMX mode (RGB)
7-ch d001-d512
-
select 7-channel DMX mode (RGB, macros, run
speed, strobe, automatic/sound, dimmer)
c--
c1
red
select between 7 static colours
c2
green
c3
blue
c4
cyan
c5
magenta
c6
yellow
c7
white
s-- 5001-5100
default range
5050
speed range for 2 switching and 2 fading built-in
programs
u--
r---
red
combine red, green and blue to create your own
custom colour
000~100
g---
green
b---
blue