Velleman VDPLOP1810RGBW - Manual (Page 9)

VDPLOP1810RGBW
V. 01 – 22/07/2013 9 ©Velleman nv
channel value function
255 built-in program p5
9 000-255 built-in program speed 0% ~100% (when ch8 is set to 052-255)
000-051 dimmer speed default
052-101 linear dimmer
10 102-152 non linear dimmer 1
153-203 non linear dimmer 2
204-255 non linear dimmer 3
5 channel mode
channel
value function
1 000-255 master dimmer 0% ~ 100%
2 000-255 red: 0% ~ 100%
3 000-255 green: 0% ~ 100%
4 000-255 blue: 0% ~ 100%
5 000-255 white: 0% ~ 100%
4 channel mode
channel
value function
1 000-255 red: 0% ~ 100%
2 000-255 green: 0% ~ 100%
3 000-255 blue: 0% ~ 100%
4 000-255 white: 0% ~ 100%
8. Cleaning and Maintenance
• All screws should be tightened and free of corrosion.
• The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections…
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
• Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
• Clean all external optics and glass/transparent surfaces with a mild soap solution, ammonia-free
glass cleaner, or isopropyl alcohol. Apply the solution directly to a soft, lint-free cloth or a lens
cleaning tissue. Softly drag any dirt or grime to the outside of the external optics or
glass/transparent surface. Gently polish until free of haze and lint. Dry carefully after cleaning.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• Wipe the device regularly with a dry, lint-free cloth. Do not use alcohol or solvents.
• Do not immerse the device in any liquid.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
9. Technical Specifications
power supply 100 to 230 VAC - 50/60 Hz
power consumption 115 W
LEDs 18 x 10 W RGBW
beam angle 22°
IP rating IP65