Velleman VDPLOP1209RGB User Manual
Page 7
VDPLOP1209RGB
V. 04 – 08/01/2013
7
©Velleman nv
•
In case of the 4-channel mode, you will have to set the start address of the first unit to 1 (CH1~4), the
second to 5 (1 + 4) (CH5~8), the third to 9 (5 + 4) (CH9~12), and so on. The highest start address is 509.
•
In case of the 5-channel mode, you will have to set the start address of the first unit to 1 (CH1~5), the
second to 6 (1 + 5) (CH6~10), the third to 11 (6 + 5) (CH11~15), and so on. The highest start address
is 508.
•
In case of the 9-channel mode, you will have to set the start address of the first unit to 1 (CH1~9), the
second to 10 (1 + 9) (CH10~18), the third to 19 (10 + 9) (CH19~27), and so on. The highest start address
is 504.
To set the device to work with a DMX controller:
1.
Press <MENU> until <PERS> is displayed and press <ENTER>.
2.
Use <UP> and <DOWN> to select the 3, 4, 5 or 9 channel DMX mode and press <ENTER>.
3.
Press <MENU> until <Addr> is displayed and press <ENTER>.
4.
Use <UP> and <DOWN> to set the DMX starting address (d--1 ~ d512) and press <ENTER>.
DMX Channel Values
3-channel mode
Channel
From
To
Description
1
0
255
Red 0 ~ 100 %
2
0
255
Green 0 ~ 100 %
3
0
255
Blue 0 ~ 100 %
4-channel mode
Channel
From
To
Description
1
0
255
Dimmer 0 ~ 100 %
2
0
255
Red 0 ~ 100 %
3
0
255
Green 0 ~ 100 %
4
0
255
Blue 0 ~ 100 %
5-channel mode
Channel
From
To
Description
1
0
255
Dimmer 0 ~ 100 %
2
0
255
Red 0 ~ 100 %
3
0
255
Green 0 ~ 100 %
4
0
255
Blue 0 ~ 100 %
9 channel mode:
Channel
From
To
Description
1
0
255
Dimmer 0 ~ 100 %
2
0
255
Red 0 ~ 100 %
3
0
255
Green 0 ~ 100 %
4
0
255
Blue 0 ~ 100 %
5
0
10
No function
11
200
Colour macros
201
205
White 1: 3200 K
206
210
White 2: 3400 K
211
215
White 3: 4200 K
216
220
White 4: 4900 K
221
225
White 5: 5600 K
226
230
White 6: 5900 K
231
235
White 7: 6500 K
236
240
White 8: 7200 K
241
245
White 9: 8000 K
246
250
White 10: 8500 K
251
255
White 11: 10000 K