Velleman LPTDX402E - Manual (Page 4)

LPTDX402E VELLEMAN 4
b) Setting the DMX Start Address
Hold the DMX button and press ▲ or ▼ to find the start address (channels 1 through 512)
c) Channel Testing
Start by selecting the channel you wish to test.
e.g. test channel 4 at full-on :
Press FNC four times (see figure to the right). FNC is used to
select the next channel.
Adjust the dimming level with ▲ or ▼.
Hold ▲ until the display reads as follows (see figure to the right) :
FL = 100%
Press the DMX key to cancel the setting. The DMX address is displayed automatically if no
other key is pressed for 10 minutes.
d) Manual Fader Dimming
Adjust e.g. the VR fader of CH2 to dim channel 2 directly.
e) How to Return to the DMX Address Display
Press the DMX key at any given time. The display will automatically return to the DMX address
display if no other key is pressed for 10 minutes.