Velleman LEDC11 - Manual (Page 5)

LEDC11
V. 01 – 28/03/2013 5 ©Velleman nv
Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
Wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, press
.
Colour patterns
With the lights on, press to select a colour pattern.
 To increase speed or brightness, press .
 To decrease speed or brightness, press .
The available patterns are:
Mode
Function Comment
1 Static red Brightness is