Velleman CAMCOLVC11 User Manual
Page 4
CAMCOLVC11
21.09.2010
4
©Velleman nv
•
comes with USB cable
4. Overview
Refer to the illustration on page 2 of this manual.
CAMCOLVC11
d
snapshot/status/motion button
a
camera lens
e
clock adjustment knob
b
status LEDs
f
micro SD card slot
c
on/off/record button
g
Mini‐B USB port
5. Operation
Charging
•
Charge the battery completely before using the camera. To do this, connect
the USB port [g] to a powered USB port using the included cable. The status
LED [b] turns green and red (red LED flashes slowly).
•
When the battery is full, only the green LED remains on.
Note: to properly condition the battery, make sure the first 5 cycles the
battery is completely depleted and fully charged again. Maintain charging
for another hour after red LED stopped flashing. After these 5 full cycles,
the battery may be used and charged at any time.
Setting the time/date
•
Set the right time on the clock using the clock adjustment knob [e]. Gently
pull the knob out (±1mm) and rotate to move the hands. Push the knob
back in the housing when the hands indicate the current time.
•
Set the internal system date and time. This is the time/date stamp that will
be used on the recorded files. To do this, connect the USB port [g] to a
running PC using the included cable. The PC will recognize the
CAMCOLVC11 as a removable disk. On the main directory, create a text
document (right click Ö new Ö Text Document). Set the name to: time.txt
(lowercase!). Open the new document and enter date and time. Format:
2010.07.23 09:14:33
(year.month.date{space}hour:minutes:seconds)