Velleman CS6MX-I - Manual (Page 12)

C.SCOPE INTERNATIONAL LTD
KINGSNORTH TECHNOLOGY PARK
WOTTON ROAD ASHFORD
KENT TN23 6LN UK
Telephone: +44 (0)1233 629181
Fax: +44 (0)1233 645897
email: [email protected]
web:
www.csmetaldetectors.com
C.SCOPE is an ISO 9001 Accredited Quality Manufacturer.
This equipment conforms to the EMC directive 89/336/EEC.
System performance may be impaired by unusually strong electromagnetic fields.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer for recycling
advice. (In the UK visit www.recycle-more.co.uk)
B1084 issue 1
Warranty & Service
Your CS6MX is guaranteed free of manufacturing defects as confirmed in our
written warranty. Contact us if you have any concerns about the operation of
your detector.
The C.SCOPE Customer Service Team really know about metal detectors and
are always ready with good advice and rapid after-sales-service.
The CS6MX is a robust design, however the control box should be treated with
similar care as any electronic product. Dry off any water splashes immediately.
The search-head may be immersed in water although the connector at the
other end of the lead should always be kept dry. Stem and search-head parts
should be cleaned and dried at the end of a day’s detecting. Do not use
solvents. If the detector has been used on a beach it will be necessary to
wash sand and salt residue off the stem adjustment mechanism and the
search-head retaining parts using tap water. The use of a search-head cover
protects the head from abrasion damage caused by friction with the ground.
Remove batteries if the detector is going to be stored for any length of time.
Do not open the controlbox front panel. There are no user serviceable parts inside
and you may invalidate your warranty.
Detector care
Caution
It is the user’s responsibility to use this product and dig only where it is safe
to do so.