Velleman ALN006 - Manual (Page 9)

6
English
3.2 displayed symbols
The transceiver has an LCD display that continuously displays information on the operating status of the radio.
Symbol Meaning description
Battery charge Indicates the charge level of the battery.
Strength of the received and
transmitted signals
According to the number of bars displayed:
• Reception mode - Indicates the level of the received signals
• Transmission mode- Indicates the level of the output power.
Radio/multifunctional channel In standby these large digits indicate the currently selected radio channel. During the programming of
features, they are used to display different parameters or values (for example bP = Beep that confirms
that a key has been pressed).
Multifunctional indicator During programming, it is used to display different values and parameters.
For example on stands for ON (enabled feature) and oF stands for OFF (disabled feature).
LO Low TX power Indicates that a low transmission power has been selected.
Keyboard lock Indicates that the keyboard has been locked.
CTC CTCSS Indicates that the currently used channel has been programmed with a CTCSS tone.
dCS dCS Indicates that the currently used channel has been programmed with a DCS code.
SCAN Channel scan Indicates that the SCAN (automatic signal scan) is in progress on the preset channels.
P Priority channel Indicates that the currently selected channel has been programmed as a priority channel during the
scan.
dW dual Watch Indicates that the Dual Watch (fast search of signals on two channels) is in progress.
Roger bip Indicates that the Roger bip function has been enabled.
VOX e-VOX Indicates that the e-vox (enhanced Voice Operated eXchange – handsfree transmission) has been
enabled.