Step 5 – reconnect the connector cable, Wiring, Wiring: rgb mode – Velleman LEDC10 User Manual
Page 5: Wiring: colour temperature mode, Wiring: dimmer mode
Advertising
LEDC10
V. 01 – 28/03/2013
5
©Velleman nv
Step 5 – Reconnect the connector cable
Make sure the connector is fully opened.
Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
Wiring: RGB mode
For RGB mode, wire the controller as follows:
Wiring: colour temperature mode
For colour temperature mode, wire the controller as follows:
Wiring: Dimmer mode
For dimmer mode, wire the controller as follows:
Advertising