Velleman MONCOLHA3 - Manual (Page 4)

MONCOLHA3
00 (07/11/2008) 4 Velleman ®
4. Features
• 2 x video/camera inputs
• OSD (on-screen display)
• automatic trigger function for reverse camera
• comes with: remote control, cables and mounting stand
5. Overview
Refer to the illustration on page 2 of this manual.
A sun shade H IR transmitter
B IR sensor I ON/OFF button
C ON/OFF button J video select button
D video select button K menu button
E mode select button L increase button
F status indication M mode select button
G mounting bracket N decrease button
6. Installation
Refer to the drawing on page 2 of this manual.
1 monitor connector plug 5 ground cable (black)
2 fuse box 6 video in 1
3 reverse cable (green) 7 video in 2
4 +12VDC power cable (red)
The car connection should be carried out by a qualified person only.
• Choose a mounting location, depending on the purpose of the monitor.
When used to connect backing-up or parking camera(s), the driver should
have a clear view of the display. For all other purposes make sure the driver
is not distracted by images and/or sound from the system.
• Mount the mounting bracket [G] and attach the monitor to the bracket with
the 4 included screws.
• Connect the monitor connector plug [1] with the jack of the monitor.
• Connect a camera/video/DVD… (not incl.) to a video input [6][7].
• Make sure the engine is switched off.
• Connect the red +12VDC power cable [4] to the +12VDC power system
of the car. Make sure there is no power on the connection wire (remove
fuse).
• Connect the black ground cable to the car ground.
• The monitor can switch on/over to AV2 automatically when reverse gear
is selected. To enable this functionality, connect the green reverse cable