Velleman MVR4 - Manual (Page 5)

MVR4
V. 02 – 28/11/2013 5 ©Velleman nv
12 M-button: Mode selection (short press for A-B repeat, long
press for track repeat or EQ mode etc.)
13 External Speakers
14 Reset button
15 Built-in microphone
5. Operation
5.1
Power On
1. Make sure the HOLD switch is unlocked.
2. Make sure the red dot button on the side of the device is set to
SAVE.
3. Press and hold the PLAY button for about 3 seconds to power on
the device.
5.2 Power OFF
• Press and hold the PLAY button.
The device should power off after it is idle for 5 minutes.
5.3 Charging the battery
To charge the battery:
1. Connect the device to your computer using the included usb
cable.
2. When USB appears on the screen, press and hold the M button
to start using the device.
Notes
•
The battery indicator appears at the top right of the screen
when the device turns on and when charging.
• The device has power-saving feature: it will power off
automatically if it is idle for 5 minutes.
• When the battery is running low, the device save the recording
automatically and power off.
• If you need to record for a longer time, you can power the device
with a USB cable.
5.4 Recording
1. Set the red dot button on the side of the device to REC.
2. The device now starts recording.