Operation – Velleman CCTVPROM16 User Manual
Page 7
CCTVPROM16
V. 02 – 21/08/2013
7
©Velleman nv
Audio playback
Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu
bar (see below). The current audio channel is indicated in the status bar.
Switch users
1. The DVR can be accessed as administrator ( ) or operator (
), icons are indicated in the status bar.
2. To switch between users, click on the user icon ( or
) to lock the current session (
).
3. Press on the key lock icon (
) than enter the password of the desired profile.
7. Operation
7.1 Display
The following image shows the screen layout.
A system date and time
B general system status
C available HDD capacity
D channel status
live audio channel 1 .. 4 enabled
playback audio channel 1 .. 4 enabled (yellow)
audio channel disabled
timer recording
digital zoom on (yellow) / off
USB mouse connected
LAN connected / Internet connected / no network connection
USB flash drive connected
Hard disk overwrite (default)
key lock on
PTZ mode
sequence mode
motion mode
recording mode
alarm mode
administrator logged on
operator logged on
Note that actual screen icons might differ slightly from the ones shown above.
7.2 Quick menu bar
Note: only available when USB mouse is connected.
Move the pointer towards the left of the monitor to open the quick menu bar: