Velleman CAMSET31 - Manual (Page 5)

CAMSET31
V. 01 – 18/03/2013 5 ©Velleman nv
13. Restore power to the vehicles’ electrical system; insert the ignition key
in the ignition switch and turn.
14. The monitor will now show the image of the camera. Verify that this
image is upright. If not rotate the camera until it is, than secure it by
tightening the nut [F].
7. Technical Specifications
system NTSC
monitor size 3.5" TFT
number of pixels 480(H) x 320(V)
video inputs 1
camera pick-up element 1/4" colour CMOS
synchronization internal
video output mirror image
horizontal resolution 420 TV-lines
IR LEDs
9
min. illumination 0 Lux when IR on
lens angle 120°
S/N ratio >= 48dB
video input signal 1.0Vpp composite video signal at 75 ohm
A/V input connections RCA connector
power supply DC 12V ±1.5V
max. current 300mA
cable 1x monitor cable (±2m), 1x power cable
(±1.5m), 1x video cable (±6m), 1x camera
cable (±1.5m)
operating temperature -20°C ~ +60°C
dimensions monitor 93 x 102 x 45mm
camera 31 x 31 x 35mm
weight monitor ±120g
camera ±60g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior
notice.