Velleman ANTM3 - Manual (Page 2)

ANTM3 VELLEMAN 2
• Familiarise yourself with the functions of the device before actually using it. Do not permit
operation by unqualified people. Any damage that may occur will probably be due to
unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short-circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void
the warranty.
4. Installation
1. AC power plug (max 230VAC / 50 Hz)
2. DC power plug (12VDC / 100 mA)
3. Antenna plug to TV set
Connect the device to the mains via the AC power
socket or use an optional AC/DC adapter. Plug the
antenna plug (4) into the TV set.
Turn the knob clockwise to activate the device.
1. Power indicator (LED)
2. Antenna gain indicator
3. Gain adjustment (0 - 30dB)
Adjust the gain via the rotary control (3)
until the picture has acquired max.
clarity. You can extend the telescopic
antennas and adjust their position to
improve picture quality. You can also
rotate the flat antenna to this end.
5. Cleaning and Maintenance
1. Mechanically moving parts must not show any signs of wear and tear.
2. The electric power supply cables must be undamaged. Have the device installed by a
qualified technician.
3. Disconnect the device from the mains prior to maintenance activities.
4. Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.
5. Entrust a qualified technician with the maintenance of this device. Contact your dealer for
spare parts if necessary.