Velleman IREXT2 - Manual (Page 5)

IREXT2
V. 02 – 13/08/2012 5 ©Velleman nv
Protect the device against dust.
Protect this device from shocks and abuse. Avoid brute
force when operating the device.
Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
• Familiarise yourself with the functions of the device before actually
using it.
• All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
• Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
• Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 power LED
2 USB input connection
3 IR probes output connection
4 IR receiver extension input connection
5. Installation/Operation
Refer to the illustrations on page 3 of this manual.
1. Insert the plug of the IR probes into the IR probes output
connection [3] at the back of the IR bender.
2. Lead the IR probes inside the cabinet and to the A/V equipment in
such way that a LED can be stuck onto the IR eye of each A/V
apparatus. Test the position of each LED first before sticking as
this should be done carefully and precisely.
3. Stick the receiver to the back (A. flat screens) or bottom
(B. thicker screens) of the screen and route the cable as
indicated.
4. Insert the plug of the receiver into the input connection [4].