Velleman CAL9 - Manual (Page 4)

CAL9
00 rev A(30/07/2008) 4
Alarm time
•
Press the LCD (1), button [a] or button [f] to select alarm time mode. ALM icon is
shown in the display.
•
Press button [b] (SET) to edit hour and use button [c] and [d] to adjust.
•
Press button [b] (SET) to edit minutes and use button [c] and [d] to adjust.
•
Press button [b] (SET) again to confirm and save the setting.
•
Press button [c] or [d] to switch the alarm on or off. When on, an icon (֠ ֠ ֠ ֠ ) is shown
in the display.
•
When the alarm sounds, press any button to turn it off. It will stop automatically after
two minutes when no key is pressed.
Calculator
•
Press the LCD (1), button [a] or button [ON/C] to select calculator mode.
•
Press the button [ON/C] to change or cancel faulty inputs.
Key tones
•
To switch the tone of the keys on or off, simply press button [e]. When on, an icon
(music note) is shown on the display.
RESET
•
In highly electrostatic environment, the device may automatically reset.
•
When an error occurs, the device may be manually reset, by inserting a pointed object
into the opening on the back (4).
7. Battery
•
Before first use, remove the battery protection tape.
•
To replace the battery, remove the screw form the battery cover (3) and open the
cover.
•
Replace the old battery with a new lithium battery type CR3032. Make sure to use
the correct polarity.
•
Remove the battery when the device is not in use.
•
Do not recharge batteries and do not throw in fire as they may explode.
WARNING: handle Lithium batteries with care, observe warnings
on battery casing. Dispose of batteries in accordance with local
regulations.
Keep the battery away from children.
8. Technical Specification
power supply 1 x CR2032C Lithium battery (incl.)
dimensions 115 x 155 x 70mm
weight 200g
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of
this device.
For more info concerning this product, please visit our website
www.velleman.eu .
The information in this manual is subject to change without prior notice.