Velleman LX102 User Manual
Page 7
LX102
V. 01 – 06/06/2012
7
©Velleman nv
Dimmer speed setting
1. Press <MENU> until
is displayed.
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to select the desired dimmer speed (
,
~
).
4. Press <ENTER> to confirm your selection.
7.4
DMX Mode
This mode allows you to control the fixture by any universal DMX controller.
•
All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to “listen” to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
•
When all devices have the same address, all the units will “listen” to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will “listen” to a separate channel
number. Changing the settings of one channel will only affect the device in question.
o
In case of the 2-channel LX102, you will have to set the start address of the first unit to 1
(CH1~2), the second unit to 3 (1 + 2) (CH3~4), the third to 5 (3 + 2) (CH5~6), and so on.
o
In case of the 3-channel LX102, you will have to set the start address of the first unit to 1
(CH1~3), the second unit to 4 (1 + 3) (CH4~6), the third to 7 (4 + 3) (CH7~9), and so on.
o
In case of the 7-channel LX102, you will have to set the start address of the first unit to 1
(CH1~7), the second unit to 8 (1 + 7) (CH8~14), the third to 15 (8 + 7) (CH15~21), and so
on.
1. Press <MENU> until
is displayed.
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to set the number of DMX channels (
,
or
)
4. Press <MENU> until
is displayed.
5. Press <ENTER> to confirm your selection.
6. Use <UP> or <DOWN> to select the desired DMX starting address (
~
).
DMX Channel Values
2-Channel Mode
channel function
from to description
1
warm white
000
255
0 ~ 100%
2
cold white
000
255
0 ~ 100%
3-Channel Mode
channel function
from to description
1 master dimmer
000
255
0 ~ 100%
2
warm white
000
255
0 ~ 100%
3
cold white
000
255
0 ~ 100%
7-Channel Mode
channel function
from
to description
1 master
dimmer
000
255
0 ~ 100%
2
warm white
000
255
0 ~ 100%
3
cold white
000
255
0 ~ 100%
4 strobe
000 009
strobe
off
010
255
strobe 0 ~ 20Hz (slow ~ fast)
5 auto
programs
000 051
no
function
052
101
auto program 1
102
152
auto program 2
153
203
auto program 3
204
254
auto program 4
255
-
auto program 5