Velleman LEDC24 - Manual (Page 8)

LEDC24
V. 02 – 29/10/2013 8 ©Velleman nv
6. Manual Dimming Mode
To use the manual dimming mode:
1. Set DIP switch 10 to OFF.
2. Disconnect the DMX controller.
3. Use DIP switches 1-9 to specify the dimming value:
Brightness
DIP 1-3 (CH1)
red
DIP 4-6 (CH2)
green
DIP 7-9 (CH3)
blue
0 % 000 000 000
25 % 100 100 100
50 % 010 010 010
75 % 001 001 001
100 % 111 111 111
0 = off; 1 = on. For example, to set the brightness to 75 %, set the
DIP switches as shown below:
7. DMX Mode
To set the device to work with a DMX controller:
1. Set DIP switch 10 to OFF.
2. Connect the external DMX controller [A,B] to the DMX input [C].
3. Use DIP switches 1-9 to specify the DMX address:
Address DIP switches Switch Represents
5
1 1
2 2
3 4
19
4 8
5 16
6 32
40
7 64
8 128
9 256