M-AUDIO Delta 410 - Manual (Page 8)

2. The ‘Add New Hardware Wizard’ will now ask how you want to find
the driver. "Search for the best driver for your device" is already
selected. Click ‘Next>’.
3. Windows will give you a selection of locations to search. Make sure
that only “Choose a Path” is checked, or click on the check box to do
so. Insert the Driver CD into your CD ROM drive. Type in the drive
letter of your CD drive (we will assume here that it is D:\) and the
path to the Delta drivers, which will be D:\Delta Products\Delta98.
Click ‘Next>’.
4. The ‘Wizard’ reports that its Windows driver file search has found the
M Audio Delta 410. Click Next>.
5. Windows is now ready to install the driver files from the specified
location. Click Next>. Windows will start to copy the files and show
you a progress report screen.
6. The Wizard reports that Windows has finished installing the software.
Click ‘Finish’. Your Delta 410 is ready for action.
After completion of the driver installation, Windows may require you to restart
Windows. If it does request a restart, remove the Drivers CD Disk from the CD drive
and respond “Yes”. The system will restart and your Delta 410 is ready for play.
Windows 95 Installation
1. After installation of the Delta 410 hardware, boot your system and
start Windows. During the Windows boot procedure, new hardware
will be automatically detected.
2. Choose the Install of "driver from disk provided by hardware
manufacturer," then click OK.
3. An ‘Install From Disk’ will prompt you to copy files from the
A:\ drive. Insert the Driver software CD into your CD ROM drive.
8