M-AUDIO Fast Track - Manual (Page 4)

Fast Track Quick Start Guide English 3
7. Once the Wizard has completed, click “Finish.” If you are presented with another Found New
Hardware Wizard dialog, repeat steps 5-7.
8. When the installation is complete, you will see a message stating “Your new hardware is
installed and ready to use. ”
Installation Instructions for Mac OS X
PLEASE NOTE: Make sure Fast Track is not connected to your computer when beginning the
installation. The following instructions will indicate when you should connect the interface to your
computer.
1. Install the Fast Track drivers by doing one of the following:
• If you have Internet access, download the latest Fast Track drivers from the Support >
Drivers page at www.m-audio.com. This is highly recommended as it provides you with
the newest drivers available.The downloaded file should automatically mount and
display its contents. If this file does not automatically mount after it has finished
downloading, click on the file from the download stack (Mac OS X 10.5), or double-click
the file from the desktop (Mac OS X 10.4) to display its contents. Next, double-click the
installer application.
• If you do not have Internet access and are installing drivers from the Fast Track CD-ROM,
a CD-ROM icon will appear on your desktop once the disc is inserted into your computer.
Double-click this icon to view the contents of the disc. Next, double-click
“Open Me.”
Finally, select your product from the drop-down menu on the welcome screen and click
“Install.”
2. Follow the driver installer ’s on-screen instructions.
During installation, Mac OS X will ask you to enter
your user name and password. Enter this
information and click OK to confirm. If you have not
configured a password for your computer, leave the
password field blank and click OK. If you are not the
computer
’s owner, ask the owner or your
Administrator for this information.