ACP MXP5221 Quick Start Guide - Manual (Page 3)

 2012 ACP, Inc.
Cedar Rapids, IA 52404
Part No. 20076802
For full product documentation visit:
www.acpsolutions.com
Quick Start Reference Guide
High Speed Commercial Combination Oven
Using MANUAL COOK (Option 4 has to be set to allow manual cooking. See options section)
Use Manual cooking when a specific time and cooking power levels are desired. It’s very useful when you are
experimenting with new food items. Maximum cook time is 100 minutes. Microwave, Fan and IR can be set in 11 different
power levels between 0-100% at 10% increments.
1. After oven has preheated to desired
temperature (200-520°F / 95-270°C), press
Manual Cook keypad.
2. Use Scroll Up and Scroll Down keypad
to move between cooking elements and time
3. For Stage 1, enter cooking time using the
number pads (up to 100 minutes). Press Scroll
Down keypad to move to the following cooking
element.
4. Enter desired microwave power (press 0 (for
0%), 1 (10%), press 5 (50%)… and press
1 twice for full power (100%). Press Scroll
Down keypad to move to the following cooking
element
5. Input desired fan speed using number keypad.
6. Enter desired Infrared (IR) power (press 0 (for
0%), 1 (10%), press 5 (50%)… and press 1
twice for full power (100%).
7. Repeat steps 2-6 for each cooking stage, if
more than one cooking stage is necessary.
8. Place food in oven.
9. Press Start keypad to begin cooking.
The display counts down. The food
category is displayed and the word Manual is
in the display.
How to Save A Manual Cook
Program to the Menu
If satisfied with the cooking results
achieved from manual cooking, save the
manual cook item:
1. To save, press Enter keypad.
Note: Option 5 must be set to save
after manual cook.
2. Highlight Menu Category by using Scroll Up
or
Scroll Down keypad or create new Menu Category
name. Press Enter keypad.
3. Highlight food category by using Scroll Up and
Scroll Down keypad to select open menu location.
4. In the Menu Item screen, highlight the location where
you wish to add the new name.
5. When new location is highlighted Press Program
keypad.
6. Use Number KEYPAD keypads to enter item name. Use
Back keypad to delete any mistakes. This step
needs to be repeated for each menu level. See user
option 2 for text case options.
7. Press Enter keypad when finished.
8. To exit Manual Cook mode, press Back keypad
repeatedly to take you to the Main Menu screen.
10. At end of cooking cycle, oven beeps and displays
animation below:
Note: To interrupt cooking cycle,
open door. To resume cooking,
close door and press start.
11. Remove food from oven.
1 Pizza
2 Misc.
4
5
6
7
8
9
0
Pasta-pizza
3 Pasta
1 Mac & Cheese
2 Alfredo
3 Tortellini
5
6
7
8
9
0
Pasta
4
1 Appet/Side
3 Meat
4 Seafood/ Sub
5 Dessert
6 Breakfast
7
8
9
0
2 Pasta/Pizza