Quick start reference guide, Cleaning oven cavity, Can i change an option – ACP DS1400E Quick Start Guide User Manual

Page 2

Advertising
background image

Cleaning Oven Cavity

• Wear protective rubber gloves when

cleaning oven.

• Use only a plastic utensil or nylon

scouring pad to aid in removing soil or

build-up from the oven interior.

Do not use knife, metal utensil, or

steel wool pad to remove baked

on material.

• We recommend using ACP Oven

Cleaner (Item CL10) and Oven

Shield (Item SH10)

• Avoid spraying caustic cleaners

or those containing ammonia,

phosphates, chlorine, sodium or

potassium hydroxide (lye) directly

on oven surfaces

Numbered Pads

Display

Options (Factory Settings in Bold)

1

Double Digit Entry

Disabled

Enabled

Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.

2

Manual Time Entry

Disabled
Enabled

Manual time entry/cooking not allowed
Manual time entry/cooking allowed

3

Reset on Door Open

Disabled

Enabled

Opening oven door does not reset oven back to ready mode
Opening oven door resets the oven back to ready mode

4

Keybeep

Disabled
Enabled

Keys do not beep when pressed (keybeep off)
Keys beep when pressed (keybeep on)

5

Keybeep Volume

OFF

LOW

MEDIUM

HIGH

Keybeep volume OFF
Keybeep volume LOW
Keybeep volume MEDIUM
Keybeep volume HIGH

6

End of Cook Signal

Solid Beep

3 Second Beep

4 Beeps Once

4 Beeps Repeating

Food done signal is a continuous

beep until reset by user

Food done signal is a three second beep

Food done signal is four beeps, continuously
Food done signal is four beeps, four times

7

Keypad Active

15 SECONDS
30 SECONDS
60 SECONDS

120 SECONDS

ALWAYS

Keypad time entry window is 15 seconds
Keypad time entry window is 30 seconds
Keypad time entry window is one minute
Keypad time entry window is two minutes
Keypad time entry window is always active

8

Preheat Warnings

Disabled

Program Temp

Cavity Temp

Both

Both temperature warnings off
Warning only when preheat temperature does not match preprogrammed temperature
Warning only when actual oven cavity temperature is not to preheat temperature
Both temperature warnings on

TEMP PAD

Temperature Scale

Degrees F

Degrees C

Temperatures are displayed in °F for 60 Hz models
Temperatures are displayed in °C for 50 Hz models

CLEAN FILTER

Message Frequency

Disabled

Weekly
Monthly

Quarterly

Oven will not display Clean Filter
Oven will display Clean Filter every seven (7) days
Oven will display Clean Filter every thirty (30) days
Oven will display Clean Filter every ninety (90) days

STAGE PAD

2012 ACP, Inc.

Cedar Rapids, IA 52404

Part No. 13092805

Printed in U.S.A. 5/12

F

or full product documentation visit:

www.acpsolutions.com

Quick Start Reference Guide

Refer to Product Safety Manual for Safety Statements

Complete Owner’s Manual available online

DO NOT power spray

Can I change an option?

Options such as single or double pad programming, beep volume,

and maximum cooking time can be changed to suit individual

preferences.

To change options oven STANDBY must display:

1. Press hidden pad.

• Pad is unmarked and located to the direct left of Preheat On/Off pad.

• Nothing will be displayed when hidden pad is pressed.

2. Press Program Save pad.

• The first user option will display. Oven is now in options mode.

3. Press number pad that controls option to be changed.

• See table below for options.

• Current option will display.

4. Press numeric pad again to change the option.

• Each time pad is pressed, option will change.

• Match code displayed with code for desired option.

5. Press Program Save pad to save changes.

• To change additional options, repeat steps 3 and 4.

• Changes take affect after Program Save pad is pressed.

• Press Stop/Reset to return to STANDBY, or open and close oven door.

Advertising