ACP MRC30S2 Owner's Manual - Manual (Page 6)

6
Display and Features
There are words in
the display that never
actually display.
The display is used for many
different models of microwaves.
Depending on the model, certain words
or symbols may never be highlighted or
become visible.
DISPLAYS DESCRIPTION
00:00 Displays cooking time. If stage
cooking is programmed, total cook-
ing time displays.
MW 50% MW 50% displays the current
microwave power level. 100% is the
highest setting, and 0% is the low-
est.
(example of 50 microwave power shown)
ITEM-05 ITEM-05 displays the single or
double digit entry of a programmed
cooking condition when using a
programmed pad.
(example of item 05 shown)
STAGE 1 STAGE 1 displays to show the
stage number (1 through 4) the
oven is at in the cooking cycle.
Cooking Display
DISPLAYS DESCRIPTION
Enter Program to Add/
Review:
Displays cooking time. If stage
cooking is programmed, total cook-
ing time displays.
STAGE 1 Displays the stage number during
cooking or when programming a
specific cooking stage. Stage num-
ber (1 through 4) indicates the stage
that is being usedin the cook.
Programming Display
Ready indicates the oven is ready
to operate.
Indicates oven is in a
preprogrammed cooking
program
Percentage
of microwave
power
Indicates oven is in a manual
cooking program
Time left
in cooking
program
Time left
in cooking
program
Percentage
of microwave
power
Cooking information
shows in display after
pressing Time Entry
while in Ready Mode.