ACP MOC5241 Quick Start Guide - Manual (Page 4)

 2010 ACP, Inc.
Cedar Rapids, IA 52404
Part No. 20015903
Printed in U.S.A. 04/10
F
or full product documentation visit:
www.acpsolutions.com
Quick Start Reference Guide
Changing user options
Options such as single or double pad programming and beep volume can be changed to suit individual preferences.
To change options:
1. Press and hold pad 2 for approximately 5 seconds with door open.
2. Option appears in display.
• Oven is now in options mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
• Changes take affect after START pad is pressed.
• To change additional options, repeat steps 3 and 4.
5. Press START pad to return to Options. Open and close oven door or press STOP to exit.
Numbered Pads Display Options (Factory Settings in Bold)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second continuous beep.
Continuous beep until done disappears.
Repeating 5 beeps bursts until door is opened.
2
Speaker Volume
OP:20
OP:21
OP:22
OP:23 Eliminates beep.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
3
Key Beep
OP:30
OP:31 Prevents beep when pad is pressed.
Allows beep when pad is pressed.
4
Keyboard Enable
Window
OP:40
OP:41
OP:42
OP:43 15 seconds after oven door is closed, keyboard disabled.
30 seconds after oven door is closed, keyboard disabled.
1 minute after oven door is closed, keyboard disabled.
2 minutes after oven door is closed, keyboard disabled.
5
End of Cycle Message
Time
OP:50
OP:51
OP:52
OP:53
OP:55
OP:56
10 seconds
20 seconds
30 seconds
40 seconds
60 seconds
1 minute 10 seconds
6
Stop during
cooking cycle
OP:60
OP:61
OP:62 Pressing stop clears information, opens door.
Pressing stop pauses oven with door closed.
Pressing stop pauses oven with door open
.
7
Maximum Cook
OP:70
OP:71 Allows 5 minutes of heating time.
Allows 10 minutes of heating time.
8
Time Entry
OP:80
OP:81 Allows use of preprogrammed pads only.
Allows use of manual time entry and preprogrammed pads.
9
Double Digit Operation
OP:90
OP:91 Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.
5 second beeps once.
OP:13
OP:14
OP:15
Continuous beep until stop pad is pressed or door is cycled.
Repeating 5 beeps burst until stop pad is pressed or door is cycled.
OP:57 1 minute 20 seconds
OP:58 1 minute 30 seconds
OP:59 1 minute 40 seconds
Time Entry
OP:16 No beep.
0
ON-THE-FLY Cooking
OP:00
OP:01 Disables ON-THE-FLY Cooking.
Allows ON-THE-FLY Cooking.