ACP MXP22 Owner's Manual - Manual (Page 15)

15
Microwave Only Feature
USING OVEN AS A MICROWAVE OVEN
This option is only available if the oven cavity temperature is
less than 200°F.
To access the MICROWAVE ONLY button, user option #15
(page 18) must be set to allow microwave only mode. The oven
default does not have the MICROWAVE ONLY feature activated.
When user option MICROWAVE ONLY is on, the MICROWAVE
ONLY icon appears in the bottom right corner of the display.
To cook a preprogrammed microwave only item follow these
steps:
1.Press the Enter keypad.
2. Use Scroll Up and Scroll Down keypad to select
desired item from the program menu or press the item number
pad.
3. Place food in oven.
4. Press start keypad to begin cooking.
5. At end of cooking cycle, oven beeps and displays animation
below:
6. Remove food from oven.
ADDING MICROWAVE ONLY MENU ITEMS
1. Press the Enter keypad.
2. Press the Program keypad.
3. Press the Enter keypad.
4. Use Scroll Up and Scroll Down keypad to select
location for new item.
5. Press the Program
keypad.
6. Enter name for category or item using keypad digits for
letters, numbers and symbols. [For example: Press Keypad
“2” three times for letter “c”]
When the correct letter is displayed, wait until cursor moves to
the next space. If a correction is necessary, press back
to erase one character at a time.
Microwave cooking uses high frequency
energy waves to heat food. When cooking,
microwave energy causes food molecules
to move rapidly. This rapid movement
between the food molecules creates heat,
which cooks the food.
MICROWAVE COOKING
WHAT IS STAGE COOKING?
Stage cooking enables several different
cooking cycles, or stages, to be used
consecutively without repeated input from
the user. Stage cooking can be set to
defrost food initially, then cook it, and then
keep the food warm until serving time. The
total cooking time for all combined stages
cannot exceed 100 minutes.
Microwave Only Icon
.
_ , & , / , 0
7. Press the Enter keypad to save name.
8. Enter Time using number keypads.
9. Use Scroll Down
keypad to select microwave
percentage.
10. Enter microwave percentage using number keypads.
11. Use Scroll Down keypad to select stage 2-4 if more
than one cooking stage is necessary.
12. Repeat steps 6-8 if more than one cooking stage is
required.
13. Press Enter
to save item.
14. Press Back keypad to exit program mode.