Dts 397, Asi splitter, Rear view – Toner Cable DTS 397 ASI Splitter User Manual
Page 2: Specifications
Specifications Subject To Change Without Notice
Rev
04-13
© Toner Cable Equipment, Inc.
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
Specifications
Rear View
DTS 397
ASI Splitter
Inputs
Outputs
ASI ports
Alarm signaling output
LED Display
1 x ASI
1 x ASI Redundancy
Configuration port
8 x ASI
1 x ASI Test
BNC, 75 Ω, (EN 50083-9)
D-Sub-9
A-Alarm
B-Alarm
System Fault, Error Data
processing,
Datarate < 0,1 Mbit/s, no
useful
MPEG-2 data, Signal detected,
ASI-Redundancy input active
Configuration
Power Supply
Mains voltage
Power consumption
General
Dimensions W/ H/ D (mm)
Weight
• Auto Redundancy input will
be switched automatically
• Remote Redundancy input
controlled by remote switch
(Sub-Min-D Contact 4/5)
• ON
Redundancy input active
(switching in case of input
error)
• OFF
Redundancy input not
connected (no
switching)
100 V
AC
to 240 V
AC
50/60 Hz,
Redundant power supply
< 10 Watt
482.6/ 44.45/ 158 ; 19”, 1 RU
3.5 kg