Toner Cable LSx 2150A (LS 16 2150A) Active L-Band (950-2150MHz) Power Divider-Splitters - Manual (Page 2)

 Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
QUINTECH SRM
2150 and SRF
1000
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
RPS S
ERIES
R EDUNDANT P OWER
S UPPLIES
RPS 24/4.8
G ENERAL D ESCRIPTION :
The RPS Series Redundant Power Supply is
designed to power as many as sixteen (16) LNA's,
LNB's, Up converters, Down converters, Line
Amplifiers or Laser Transmitters. The unit is com-
prised of two separately fused power supplies
connected together to provide instantaneous
redundancy should one of the supplies fail.
The two power supply modules are on individual
drawers to provide easy replacement of a failed
module. A failed module can be replaced with the
RPS Series Redundant Power Supply in opera-
tion. (Hot-Swapping for Zero Downtime).
P R O D U C T S P E C I F I C A T I O N S :
RPS F Series
Output Voltage: +18 VDC or +24 VDC (customer specified)
Maximum Current: 18 VDC @ 3.6 A
24 VDC @ 4.8 A
Operating Frequency: 270 - 2150 MHz
Insertion Loss: 1 ± 0.5 dB max.
Flatness: ± 1.0 dB max.
Return Loss: 14 dB nom.
Input Connectors: Type "F", 75
Ω
Output Connectors: Type "F", 75 Ω
Power Required: 120 VAC, 60 Hz
Mechanical: 3 RU (5.25” H X 19.0” W X 20.0” D)
RPS B Series
Output Connectors: 16 pairs of binding posts (Red & Black)
(with individually fused outputs)
LS
X
2150A
A CTIVE L- BAND (950-2150MH Z )
P OWER D IVIDER /S PLITTERS
G ENERAL D ESCRIPTION :
Operating over the 950-2150 MHz frequency
range, the LSx 2150A series of active L-
band splitters may be used in any headend
installation using this frequency plan. They
permit simple splitting of either the vertical or
horizontal signals into multiple branches.
These commercial quality power splitters
meet strict level, match and loss specifica-
tions achieved through the use of Quintech’s
proprietary microstrip and SMT technology.
LS 16 2150A
P R O D U C T A V A L A B L E :
LS4 2150A (1x4)
LS8 2150A (1x8)
LS16 2150A (1x16)
LS32 2150A (1x32)
LS48 2150A (1x48)
A V A I L A B L E C O N F I G U R A T I O N S :
4, 8, 16, 32, and 48-way configurations. Some models
are also available in dual, quad and custom designs.
O P T I O N S :
Redundancy. BNC or SMA Connectors.
C O M P L E M E N T A R Y P R O D U C T S :
RPS Series Redundant Power Supplies