Toner Cable TMP-S Series 1 GHz Hardline Digital Splitters - Manual

Specifications Subject To Change Without Notice Rev 10-11 ©Toner Cable Equipment, Inc.
TMP-S Series
1 GHz Hardline Digital Splitters
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Features
• 5MHz to 1GHz Bandwidth performance
• Bi-directional power rating to 15 amps @ 30, 60 and
90Vac provide compatibilty with most systems
• Housing top stainless steel mounting hardware for easy
installation
• Epoxy coated aluminum alloy housing with tongue in
groove interface provides 100dB effective EMI/RFI
shielding reducing ingress/egress signals
• Extended connector collars provide shoulder for good heat
shrink bonding, eiliminating connector water migration
extending life of housing
• Rotating internal seizing pins provide installation flexibility
allowing installation options
• Performance tests conducted comforming with SCTE
standards IPS TP-201, 202 and 203
Ordering Information
TMP-S2 2-Port 1GHz Digital Splitters
TMP-S3 3-Port 1GHz Digital Splitters
TMP-S2 5-10MHz 10-400MHz 400-600MHz 600-750MHz 750-900MHz 900-1000MHz
Insertion Loss (In-Out) max 4.2 4.1 4.5 4.9 5.2 5.3
Isolation (Out-Out) min 22 25 25 25 23 21
Return Loss-All Ports 17 18 18 17 17 17
EMI 100dB
TMP-S3 5-10MHz 10-400MHz 400-600MHz 600-750MHz 750-900MHz 900-1000MHz
Insertion Loss (In-Out) max 4.0/7.5 3.9/7.4 4.8/7.9 4.9/8.2 5.2/8.4 5.4/8.7
Isolation (Out-Out) min 23 25 25 25 23 21
Return Loss-All Ports 17 18 18 17 17 17
EMI 100dB
Specifications