Toner Cable GigaBUD HDTV Over CAT-6, CAT-7, or Cable UTP - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 10-10 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
HDTV Over CAT-6, CAT-7 or Cable UTP
High Definition GigaBUD Specifications
Physical Description:
• Weight: Approximately 6.5 lbs.
• Size: 12” L x 19” W x 3.5”H standard size enclosure with mounting
ears
• Mounts in standard 19” rack / 2U High
• Three status indicator lights: master (red); slave (green); power
(red/green)
• Front Panel: two rows of shielded RJ-45 Jacks (24 per row and 12
per row versions)
• Rear Panel: 19 F-Connectors; eight Outbound; eight
• Inbound; one Cascade In; one Cascade Out; one CATV In.
• UTP outbound RF video on pins 7&8, return RF on pins 4&5, and
shared sheath with 10/100 Ethernet on pins 1, 2, 3, & 6.
Return Path:
• HZ 6001-1, HZ6001-2
NO
HZ 6001-1R, HZ6001-2R YES
Electrical Power:
• Input Voltage: 90-264 VAC auto sensing
• Input Current: 1.5/115 VAC, 1A/230 VAC (fused 2A)
• Input Frequency: 47 HZ to 63 HZ
• DC Power: Maximum 75 Watts
• Meets all safety standards: UL/CSA Listed
• UTP Outbound Power: 8 VDC / 0.5 watts are supplied to each UTP
outbound port on pins 7&8. Power is switched to each individual
port only when impedance signature from “HD GigaBOB” is recog-
nized
Electrical Radio Frequency:
• Bandwidth
Forward: 54 MHz to 860 MHz
DOCSIS/FSK modem return compatible: 5 MHz to 42 MHz
“R-Series” Video Return: 5 MHz to 88 MHz
• Pilot Tone
Frequency: 240 MHz
Output Level: +23dBmV on all eight coax Outbound ports on
rear panel
• Automatic Gain Control (AGC)
Detect Frequency: 240 MHz
Frequency Adjustment Range: 5 MHz to 860 MHz
System Performance:
• C/N: >43 dB
• CTB: >50 dB (134 channel loading)
• CSO: >51 dB (134 channel loading)
• UTP Output Launch Level
29 to 38 dBmV (54 MHz to 860 MHz) analog signals
23 to 32 dBmV for digital signals
• MER: >32 dB
• CATV Input: +23 dBmV flat NTSC; +17dBmV flat ATSC/QAM; and
+20 dBmV flat QAM for Cable Box applications only
• Standard reverse upstream path accomodates RF modem or
remote T-Channel video return from 5 MHz to 42 MHz
• “R-Series”: reverse upstream path accomodates RF video return
from 5 MHz to 88 MHz, channels T7-T13 and channels 2-6
Environmental
• Operating Temperature: 0 to 55°C
• Relative Humidity: 5 to 95% non-condensing
• Storage Temperature: -40 to 70°C
• BTU/HR:
Approx. 200
Agency Standards
• UL/CSA Listed
• FCC Regulations, Part 15 Compliant
• TIA/EIA 568 (A or B)
Physical Description:
Free-Hanging
• Less than 6 ounces
• Size: 2.8”L x 2.4”W x 1.0” H
• F-Connector (bottom)
• (2) RJ-45 Jacks (top)
• LED distance indicators (bottom)
Wall Mount
• Fits into a Single Gang Box
• F-Connector (top front)
• (1) RJ-45 Jack (bottom)
• 3” CAT 6 jumper (included)
Electrical Radio Frequency:
• Impedance matching 100 ohm to 75 ohm with signature protection
to avoid accidental data connection
• Forward 54 MHz to 860 MHz (pins 7&8)
Assures proper TV receive level (0 to +15 dBmV) for analog
signals and ±10 dBmV for digital
• Return Path: 5 MHz to 42 MHz
• Return loss >14 dB
• C/N >43 dB
• MER >32 dB
Electrical Power
• 8 Vdc at ½ watt supplied remotely on RJ-45 pins 7&8 via HD
GigaBUD video hub (no local power required)
Electrical Control:
• Response Level: 14 dBmV
• Response Time: 10 micro seconds
Environmental:
• Operating Temperature: 0 to 55°C
• Relative Humidity: 5 to 95% non-condensing
• Storage Temperature: -40 to 70°C
Agency Standards
• UL/CSA Listed
• FCC Regulations, Part 15 compliant
• TIA/EIA 568 (A or B)
High Definition GigaBOB Specifications