Msa-100 multi-source analyzer, Ordering information – Toner Cable MSA-100 Multi-Source Analyzer User Manual

Page 9

Advertising
background image

969 Horsham Road

l

Horsham, Pennsylvania 19044 USA

l

Phone: 215-675-2053 Fax: 215-675-7543

l

[email protected]

RF Level

-80 to -20 dBm, ±3 dB

MER

10 to 32 dB, ±2 dB

Constellation

Diagram dependent on selected modulation

MSA-OPT-DVBS-S2

Input Ports

Limit 4 (2 slots x 2 ports per slot )

Antenna Inputs

2 F-type, female, 75 ohms

Number of Channels

1 (16/32-APSK)
2 (QPSK/8-PSK)

Monitoring Outputs

2x ASI

Tuning Range

950 to 2150 MHz

Input Return Loss

>10 dB

Input Sensitivity

-60 to -30 dBm

Baud Rate

2 to 40 MBd

Metrology RF Level

-60 to -30 dBm

SNR

5 to 35 dB

MER

10 to 26 dB

BER (DVB-S2)

Pre LDPC

Constellation

256x256

LNB Supply (per channel)

13/18 V 400 mA

ORDERING INFORMATION

MSA-100-MPEG2

Multi-source analyzer, entry-level platform, MPEG-2 format, standard with 1 codec
and 4 SD or 2 HD PIPs, providing full conformance testing and traffic status
monitoring

MSA-100-MPEG4

Multi-source analyzer, entry-level platform, MPEG-4 format, standard with 1 codec
and 4 SD or 2 HD PIPs, providing full conformance testing and traffic status
monitoring

MSA-100-H264

Multi-source analyzer, entry-level platform, H.264 format, standard with 1 codec
and 4 SD or 2 HD PIPs, providing full conformance testing and traffic status
monitoring

MSA-100-VC1

Multi-source analyzer, entry-level platform, VC-1 format, standard with 1 codec
and 4 SD or 2 HD PIPs, providing full conformance testing and traffic status
monitoring

Note: Number of PIPs and/or shadow testing varies depending on codec type, picture resolution and bitrate.

MSA-100 Multi-Source Analyzer

Advertising