Toner Cable 2804 110 Channel Fiber Optic Transmitter - Manual (Page 2)

Telephone: Nationwide: Fax: E-mail: Internet:
For
ce 2804 110 Channel CA
TV T
ransmitter
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Ordering Information
2804TH-SCSP/06 110 Channel CATV VSB/AM Tx, SM, 1310 nm, SC/APC Optical Connector, +6 dBm Opt. Output
2804TH-SCSP/08 110 Channel CATV VSB/AM Tx, SM, 1310 nm, SC/APC Optical Connector, +8 dBm Opt. Output
2804TJ-SCSP/10 110 Channel CATV VSB/AM Tx, SM, 1310 nm, SC/APC Optical Connector, +10 dBm Opt. Output
2804TK-SCSP/12 110 Channel CATV VSB/AM Tx, SM, 1310 nm, SC/APC Optical Connector, +12 dBm Opt. Output
2804TL-SCSP/13 110 Channel CATV VSB/AM Tx, SM, 1310 nm, SC/APC Optical Connector, +13 dBm Opt. Output
* System performance specifications indicated for use with 9/125 µm SM fiber.
FC/APC optical connectors and other optical output powers are available for the transmitter.
The PDS transmitter is designed to operate with the Model 2807 and/or Model 2808 CATV receivers.
2804 110 Channel PDS Transmitter Specifications
Optical Characteristics*
Min Typ Max Units
Channel Loading 110
Bandwidth (110 Ch) 40 8 70 MHz
Operating Wavelength 1290 1310 1330 nm
Required Fiber Bandwidth 2,000 MHz
Input/Output Impedance 75 Ohms
Side Mode Suppression Ratio 30 dB
Back Reflection Tolerance -50 dB
CSO -65 dB
CTB -69 dB
Electrical, Environmental and Physical Characteristics*
Min Typ Max Units
Power Supply Voltage 120 240 VAC
Power Supply Frequency 50 60 Hz
Power Dissipation 25 Watts
Fuse Rating (Slow Blow) 1.25 A
Operating Temp. Range 0 +45 °C
Storage Temp Range -20 +70 °C
Humidity 0 90 %
Weight 5.5 lbs
2.5 kg
Dimensions 19 x 1.72 x 14.1 in
483 x 43.7 x 358 mm