Toner Cable CAT6S-G CAT6 UTP Indoor Cable, Grey Jacket - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 12-12 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications
CAT6S-G
Category 6 UTP Indoor Cable
Applications
Telephony Voice Wiring, Network T Base 10 / 100 / 1000, UL Subject 444, EIA / TIA568 & ISO / IEC 11801
Construction
Center Conductor: 4 pairs 0.0226” (23 AWG) bare copper
Dielectric: 0.0403” PE
Separator Cross: PE
Outer Jacket: 0.248” PVC
Electrical Characteristics at 20°C
Conductor Resistance (Max): 98.6
Ω / km
Insulation Resistance (Min): 5000 M Ω / km
Capacitance: < 55 pF / m
Impedance: 100 Ω (±15%)
Transport & Storage
Temperature: 0 +50°C
Operating Temperature: -20 to +65°C
Performance Characteristics
Frequency Attenuation / 100m NEXT PS-NEXT ELFEXT PS-ELFEXT Return Loss
(MAX) (MIN)
1 MHz 1.9 dB 72 dB 69 dB 68 dB 65 dB 20 dB
10 MHz 5.9 dB 65 dB 62 dB 53 dB 50 dB 23 dB
16 MHz 7.5 dB 61 dB 58 dB 48 dB 45 dB 26 dB
25 MHz 9.3 dB 55 dB 52 dB 45 dB 42 dB 25 dB
40 MHz 12.1 dB 53 dB 50 dB 42 dB 39 dB 23 dB
60 MHz 14.8 dB 52 dB 49 dB 35 dB 32 dB 22 dB
100 MHz 19.3 dB 50 dB 47 dB 31 dB 28 dB 22 dB
150 MHz 23.6 dB 43 dB 40 dB 28 dB 25 dB 19 dB
200 MHz 27.5 dB 40 dB 37 dB 24 dB 21 dB 18 dB
250 MHz 30.6 dB 38 dB 35 dB 21 dB 18 dB 18 dB
• PVC - Polyvinylchloride • AWG - American Wire Gauge • AL / PE - Aluminum / Polyethylene