Toner Cable FAM _ PPFAM In-Line Attenuator Pads - Manual

Features
• Reduces RF signal strength to reduce intermodulation caused by high input levels
• Precision SMD monolithic ceramic printed circuit board
• Etched glazed type resistors
• Return loss 20dB typical
• Attenuation values 1, 3, 6, 8, 10, 12, 16, 20dB (FAM)
• Attenuation values 3, 6, 8, 10, 12, 16, 20dB (PPFAM)
• Flatness 0.5dB
• 1% Tolerance components
• 22-Gauge spring steel center
• Nickel plated precision machined brass
Specifications Subject To Change Without Notice Rev 10-11 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
PPFAM FAM
Bandwidth (MHz) 5~2150MHz 5~1000MHz
Flatness 5MHz-1GHz <0.5 <0.5
Flatness 5MHz-2GHz <2.0 -
Insertion Loss @ 1GHz value ±1dB value ±1dB
Insertion Loss @ 2GHz value ±2dB -
Return Loss @ 1GHz >20dB >20dB
Specifications
FAM / PPFAM
In-Line Attenuator Pads
FAM
PPFAM
FAM
PPFAM
Ordering Information
FAM Inline Attenuator Pads (Values: 1, 3, 6, 8, 10, 12, 16, 20dB)
PPFAM Inline Attenuator Pads (Values: 3, 6, 8, 10, 12, 16, 20dB)