Toner Cable 10000 WiBa Series Fiber Optic Systems - Manual (Page 2)

©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
Or
tel W
iBa Series Fiber Optic Links
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
Part Number/Model Description Capacity
10990A 3U 19” Rack Mount Chassis Up to 16 RX or 8 TX’s
10901A 3U Plug-in Power Supply (90-260 VAC input)
10901B 3U Auxiliary Plug-in Power Supply (90-260 VAC Input)
10209A 75 Ω BNC 1:1 Redundancy Switch 5 MHz to 2500 MHz
10209C 75
Ω Type “F” 1:1 Redundancy Switch
5 MHz to 2500 MHz
10209E-C01 50 Ω SMA 1:1 Redundancy Switch 5 MHz to 2700 MHz
Accessories
ORDERING INFORMATION
Fiber Transmitter
Example, 10383F-SA-1305
1038 N X -YY -XXXX
Model Amplification & BW RF Connector Optical Connector Output
1038 Wideband Fiber
Optic Transmitter
1 Unamplified, 5 to 2700 MHz, 50
Ω
2 Amplified, 5 to 2700 MHz, 50 Ω
3 Unamplified, 5 to 2500 MHz, 75 Ω
4 Amplified, 5 to 2500 MHz, 75
Ω
S SMA (50
Ω only)
B BNC
F F-TYPE (75 Ω only)
FA FC/APC
SA SC/APC
Fiber Receiver
Example, 10483F-SA
1048 N X -YY
Model Receiver Quantity & BW RF Connector Optical Connector
1048 Wideband Fiber
Optic Transmitter
1 Single, 5 to 2700 MHz, 50
Ω
2 Dual, 5 to 2700 MHz, 50 Ω
3 Single, 5 to 2500 MHz, 75 Ω
4 Dual, 5 to 2500 MHz, 75
Ω
S SMA (50
Ω only)
B BNC
F F-TYPE (75 Ω only)
FA FC/APC
SA SC/APC
1301 2 dBm Output
1305 9 dBm Output