Toner Cable 2792PRO Digital - Stereo Audio, Video, Data Fiberoptic Link - Manual (Page 2)

Telephone: Nationwide: Fax: E-mail: Internet:
Fo
rce 2792PR
O A/V/D T
ransceiv
er
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Optical Characteristics
1310 nm
Optical Output Power (Tx)
-2.5 dBm
Optical Sensitivity (Rx) -28.0 dBm
Optical Saturation (Rx) 0 dBm
1550 nm
Optical Output Power (Tx)
-2.5 dBm
Optical Sensitivity (Rx) -28.0 dBm
Optical Saturation (Rx) -1 dBm
Video, Data, and Audio Characteristics
Required Fiber Bandwidth
1000 MHz
Differential Gain Error .5 to 2.0%
Differential Phase Error .5 to 2.0%
Input Signal Range 100 IRE
Video Channel Gain 1.0 V/V
Video Resolution 12 Bits
Video SNR 1 67 dB
Video Bandwidth ±0.2 dB to 6 MHz
Number of Audio Channels 2
Audio Frequency Response 20 Hz to 20 kHz
Audio SNR 90 dB
Audio THD .1 %
Audio I/O Impedance 600 Ohms
(user selectable) 10 kOhms
Audio Signal Resolution 24 Bits
Audio Channel Gain -1.0 to +1.0 dB
Audio Channel Crosstalk -70 dB
Number of Data Channels 1
RS-232 Data Rate (user selectable) 115,200 b/s
RS-422 Data Rate (user selectable) 460,800 b/s
BER 10 -7
Model 2792PRO Specifications and Ordering Information
1) SNR: Measured EIA-250 weighted.
2) This product conforms to the Electromagnetic Compatibility
Requirements in accordance with European Community Directive #89-336-
EEC.
Electrical, Environmental, and Physical Characteristics
1310 nm
Power Supply Voltage
+12 to +24 VDC
Power Dissipation 6 Watts
Operating Temp. (SM) 0 to +50 °C
Storage Temp. -20 to +70 °C
Humidity (RH, non-condensing) 0 to 95%
Weight (Stand-alone) 50 oz
Weight (3RU) 20 oz
Dimensions (Stand-alone) 4.36 x 1.26 x 11.50 in
111 x 32 x292 mm
Dimensions (3RU) 5.06 x 1.39 x 12.00 in
129 x 35 x 305 mm
Transmitter, Receiver, and Transceiver P/N 3RU Chassis and all P.S. P/N
Model 2792 PRO Transmitter & Receiver
Model 2792 PRO Transceiver Stand-alone
1) The "XXXX" in the part number specifies one of
eight CWDM wavelengths. CWDM wavelengths are
1470 nm, 1490 nm, 1510 nm, 1530 nm, 1550 nm,
1570 nm, 1590 nm, and 1610 nm, depending on the
channel plan ordered.
2) SC/PC and SC/APC connector options available.
Replace ST in the part number with SC for SC/PC
or SA for SC/APC.