Apm-215, Audio monitor, Specifications – Toner Cable APM-215 Audio Monitor User Manual
Page 2

Specifications Subject To Change Without Notice
Rev 11-12
©Toner Cable Equipment, Inc.
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
APM-215
Audio Monitor
Specifications
Inputs A-B
Balanced Analog Audio (XLR) (Left and Right)
Outputs 1-8
Balanced Analog Audio (DB-37)
(Left and Right) Loop-Through
Input Impedance
>40k ohms balanced, A and B 600 ohms switch-selectable
Input Level for Maximum Output
0 dBv balanced
(Volume Full On)
Input Overload
+26 dBv balanced
Peak Acoustic Output (at 2 ft.)
98 dB SPL
Response, 6th Octave
80 Hz to 16 kHz ±7 dB (-10 dB @ 50 Hz and 22 kHz)
Power Output
RMS Each Side
10 W transient/5 W continuous
RMS Bass
20 W transient/10 W continuous
Distortion, Electrical
<0.15% at any level below limit threshold
Distortion, Acoustic
8% or less at worst case frequencies above 180 kHz including
cabinet resonance; typically <2%
Hum and Noise
-68 dB below full output
Magnetic Shielding
<1 gauss any adjacent surface
Level Calibration
-6, 0, +4, +8 dBv
Frequency Response
20 Hz to 18 kHz (± 0.5 dB)
Level Meter Type
10-Segment, 2 Tri-color LED bar graph
LED Color Tri-Color
Red, green, and amber
Metering Range
23 dB (+16 dB to -49 dB)
Display Modes
VU or PPM, Selectable
VU Characteristics
Rise Time
300 ms to 99% of full indication
Fall Time
300 ms
PPM Characteristics
Attack Time
10 ms
Decay Time
2 seconds, 0 to -20 dB
Power
Power Consumption (Average
35 W
Maximum)
AC Mains Input
100 to 240 V AC, 50 to 60 Hz
Mechanical
Dimensions (H x W x D)
1.75 x 19 x 12 in. (4.4 x 48.3 x 30.5 cm)
Weight
14 lbs (6.4 kg)
Environmental
Operating Temperature
0° to 50° C
Storage Temperature
-50° to 75° C
Humidity
90% maximum (non-condensing)
Standard Accessories
Operation and service manual
VTM/TVM/ASM adapter cable 37-pin D-sub female to 37-pin D-sub female
connector
US Power cord
37-pin D-sub, female
ORDERING INFORMATION
APM-215
Stereo audio program monitor, high fidelity. 10 analog audio inputs. Two
10-segment color bar graphs with selectable peak and average response. 4
selectable input reference levels. Easy integration with VTM and TVM Series
monitors via supplied 37-pin audio adapter cable. 1RU
Options
EPC
European power cord
EPC-AA
Australian power cord
EPC-UK
United Kingdom power cord