Toner Cable MEC MPEG2 Encoder - Manual

Features
• 2RU Modular design with low power consumption
• Analog composite video input in NTSC/PAL format
• 4:2:0 MP@ML video compression from 2.5 to 15 Mbps
• Analog stereo audio input
• MPEG-1 layer2 or Dobly® Digital (AC3) audio compression
• ISO/IEC 13818-1 PAT and PMT tables with Single Program transport
stream (SPTS) output transport stream
• Local control via front panel display and keys
• Remote control via supplied utility
Specifications Subject To Change Without Notice Rev 05-12 ©Toner Cable Equipment, Inc.
MEC
MPEG-2 Encoder
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
VIDEO INPUT
Input interface
Signal Composite
(NTSC/PAL)
Connector RCA Jack (Yellow)
Level 1 Vp-p, 75Ω Unbalanced
ENCODING
Type MPEG-2 MP@ML
Supported Resolution 720 x 480 (NTSC)
720 x 576 (PAL)
Frame Rate 29.97 (NTSC)
25 (PAL)
AUDIO INPUT
Input Interface
Signal Stereo
Connector
RCA Jack (Red, White)
Level 2Vrms max.
ENCODING
Type MPEG-1 Layer 2 or Dolby Digital (AC3)
Sampling Rate 32/44.1/48 KHz
Mode MPEG-1 Layer 2: Stereo/Joint Stereo/
Dual Channel /Single Channel
Bit Rate MPEG-1 Layer 2: 32 to 384 Kbps
Dolby Digital (AC3): 128 to 448 Kbps
OUTPUT
Output Interface DVB-ASI
Connector BNC
Level 800 mVpp Nominal, 75Ω
MULTIPLEX
Type ISO/IEC 13818-1 PAT and PMT tables with
Single Program Transport Stream (SPTS)
Bit Rate Up to 19.2 Mbps
CONTROL
Local Operation 8x2 LCD Display & Five front control keys
REMOTE OPERATION
Connector (PC) RS232 (UNIT) RJ-11
Interface Supplied Utility
Power Consumption 12V/0.486A
5V/0.760A
MECHANICAL
Dimension 2” (W) x 3.5” (D) x 10” (H),(52.8 x 88 x 254 mm)
Weight
1.6 lbs (0.726 kg) approx
Ordering Information
MEC
MPEG-2 Encoder
Specifications
Front View Rear View Side View
MEC Remote Control Software