VANCO VPW-280795 - Manual (Page 5)

www.vanco1.com
888.769.4156 5
CONNECT AND OPERATE
1. Connect up to 11 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite
Receiver, etc. to the multi-format inputs (VGA, S-Video, Composite w/Audio, Component w/stereo, DVI w/
digital, HDMI) on the unit.
2. Connect the output HDMI ports, starting with output 1, to high-definition displays such as an HDTV or HD
projector that use HDMI inputs. Note that high-speed HDMI cables are recommended for the distances
that are required for each connection.
3. For power, plug in the source(s) first, followed by the Vanco Powered by Wyrestorm VPW-280795
Switcher and Scaler (power supply included), followed by each output connected.
4. Power on each device in the same sequence.
At this point each display connected should display the assigned source (input 1 at default when powered on
initially), scroll through each of the sources on each display to ensure everything is in working order by using
the input selector knob on the front of the unit, and using included IR remote (IR extension cable included if
needed). If a display is having difficulty receiving a signal, access the display’s menu and adjust the resolution
(lowest to highest until signal is displayed). A 24 Hz vertical refresh rate may work better than 60 Hz or
higher.
Game Console Game Console
DVD Player
VGA
S-Video
Audio
Speakers
DVI-I
Component (Y,W,R) Video
Composite (R,G,B) Video
with Stereo Audio
Composite (R,G,B) Video
with Stereo Audio
Computer Computer
VCR
DVD Player DVD Player
Cable Box BluRay® Player
Cable Box