VANCO VPW-280577 - Manual (Page 5)

www.vanco1.com
888.769.4156 5
CONNECT AND OPERATE
1. Connect the HDMI input source ( such as HD-DVD, PS3, STB, etc.) to the Transmitter unit.
2. Connect a CATV coaxial cable from COAX output of the Transmitter to the COAX input of the Receiver.
3. Connect the HDTV display ( such as HD-LCD,HD-DLP) to the HDMI output of the Receiver.
4. Connect the IR TX pigtail into Transmitter unit; connect the IR RX pigtail into the Receiver unit.
5. Or for reverse operation, connect the IR RX pigtail into the Transmitter unit; connect the IR TX pigtail into
Receiver unit.
Attention: Please insert and extract cables gently.
Coax Cable