VANCO 280715 (100ft wall plate) - Manual (Page 3)

www.vanco1.com 800-626-6445
3
FEATURES
Super IR Control
These active extenders units have the capability of transporting IR signals over the UTP cables. These
extenders can control the source from the display. This is accomplished by using an optional IR Receiver pigtail
(Part # 280721) attached to the receiver pointing away from the display and the IR Transmitter pigtail (Part #
280720) attached to the sender and pointed at the source.
*** These products are only compatible with Vanco’s Super HDMI IR Accessories.
Over-Current Over-Voltage Protection
The circuit boards are equipped with both over-current and over-voltage protection and automatically power
down if these are encountered. The power circuit will restore itself automatically once the excessive current or
voltage conditions are rectified.
HDMI® Extender over 2 UTP Cables with IR Control
(50m/164 ft)
Part # 280723
• Allows HDMI Audio/Video Signals to be
transmitted over Dual Cat5e/Cat6 Cables
• Transmission Range: Extends 1080p
resolutions up to 164 ft over Cat5e Cables;
Extends 1080p resolutions up to 180 ft over
Cat6 Cables
• High Speed Chip Set that Supports 3D, 4K x 2K
• Full HD1080P
• HDCP Compliant
• Super IR control system, IR transport channel
can be forward or backward. IR transmitters
and receivers are needed (Part #s 280720,
280721)
• Supports Digital Audio Format, DTS-HD/Dolby-
True HD/LPCM7.1/AC3/DTS/DSD
• Unique Circuit Design Allows for Protection
against High Voltage and Peak Currents
• Tested for Compatibility with all leading HD
Video brands
• Tested with 7.1 Home Theater Systems
• Shelf or Wall Mountable
• 5V DC, UL Listed Power Supply for Receiver
• Dimensions: 1.25”W x .875”H x 3.25”D