VANCO VPW-280608 - Manual (Page 3)

www.vanco1.com
888.769.4156 3
HDMI® Receiver - Part Number VPW-280781
The Vanco 280781 HDMI Receiver uses 2 UTP cables to transport a HDMI signal from the Vanco 280709
HDMI 8x8 Matrix Selector Switch or VPW-280608 HDMI 1x8 Splitter over UTP. This allows the HDMI signal
to be transported a maximum distance of 50 meters (164 ft) while using dual Cat-5e or Cat 6 UTP cable as
the transmission media.
Benefits of using the Vanco VPW-280781 HDMI Receiver:
1. The length of an HDMI cable is fixed after the connectors are attached at the factory and must be
purchased in various standard lengths. This is because the HDMI connector can only be soldered and
terminated by trained workers using specialized fixtures and test equipment in a factory. The installer
normally can’t do an effective job in the field. However, Cat 5e and Cat 6 bulk cables are available and
most installers have the proper tools and hand-held testers to fabricate custom lengths with RJ-45
modular plugs in the field.
2. By using dual Cat 5e or Cat 6 UTP cables, a transmission distance for 1080p signals of 50 meters (164
ft) can be achieved. For 1080i distances of 60m (196 ft) can be achieved. In general, HDMI cables are
only available in fixed lengths and the signal must be re-generated when these lengths exceed 15 to 20
meters (50 to 66 ft).
3. The Receiver working with the Matrix Switch has the ability of equalizing and amplifying the HDMI signal.
It is also possible to use additional Transmitter and Receiver pairs to create a larger distribution area by
daisy chaining these together.
4. The IR system can control the sources from the sinks, or can control the sinks from sources. Thus both
downstream and upstream controls are available. Supports 30 kHz to 56 kHz IR signals.
HDMI® UTP Receiver
Part # VPW-280781
• For Use with Vanco’s HDMI 8x8 Matrix Selector
Switch over UTP (Part # VPW-280709) or
HDMI 1x8 Splitter over UTP (Part #VPW-
280608)
• Transmission Range: Extends 1080p
resolutions up 164 ft over dual Cat 5e or Cat
6 cable
• Reading and saving EDID function from displays
• IR receiver pigtail included
• Dimensions: 1.8” W x .9” H x 3.3” D
• 5V DC Power Supply
• FullHD1080P/ 120Hz
• HDCP compliant
• Auto-Adjustment of feedback, equalization and
amplification
• LED indicator lights to show the power and
video signals
• ESD Protection inside
• Supports Digital Audio Foramt, DTS-HD/Dolby-
True HD/LPCM7.1/AC3/DTS/DSD
• Tested for Compatibility with all leading HD
Video brands
• Tested with 7.1 Home Theater Systems
• Mounting Ears included
FEATURES